Damage Evolution of Coal with Inclusions Under Triaxial Compression
Konietzky, Heinz
Herbst, Martin
DOI: https://doi.org/10.1007/s00603-021-02436-9
Persistent URL: http://resolver.sub.uni-goettingen.de/purl?gldocs-11858/10960
Konietzky, Heinz; Geotechnical Institute, TU Bergakademie Freiberg, Freiberg, Germany
Herbst, Martin; Geotechnical Institute, TU Bergakademie Freiberg, Freiberg, Germany
Abstract
Along with the advance of the working face, coal experiences different loading stages. Laboratory tests and numerical simulations of fracture and damage evolution aim to better understand the structural stability of coal layers. Three-dimensional lab tests are performed and coal samples are reconstructed using X-ray computer tomography (CT) technique to get detailed information about damage and deformation state. Three-dimensional discrete element method (DEM)-based numerical models are generated. All models are calibrated against the results obtained from uniaxial compressive strength (UCS) tests and triaxial compression (TRX) tests performed in the laboratory. A new approach to simulate triaxial compression tests is established in this work with significant improved handling of the confinement to get realistic simulation results. Triaxial tests are simulated in 3D with the particle-based code PFC3D using a newly developed flexible wall (FW) approach. This new numerical simulation approach is validated by comparison with laboratory tests on coal samples. This approach involves an updating of the applied force on each wall element based on the flexible nature of a rubber sleeve. With the new FW approach, the influence of the composition (matrix and inclusions) of the samples on the peak strength is verified. Force chain development and crack distributions are also affected by the spatial distribution of inclusions inside the sample. Fractures propagate through the samples easily at low confining pressures. On the contrary, at high confining pressure, only a few main fractures are generated with orientation towards the side surfaces. The evolution of the internal fracture network is investigated. The development of microcracks is quantified by considering loading, confinement, and structural character of the rock samples. The majority of fractures are initiated at the boundary between matrix and inclusions, and propagate along their boundaries. The internal structure, especially the distribution of inclusions has significant influence on strength, deformation, and damage pattern.
Subjects
Coal sampleX-ray CT
Sample reconstruction
Triaxial compression test
Discrete element modeling
Flexible wall approach