Experimental Deformation of Opalinus Clay at Elevated Temperature and Pressure Conditions: Mechanical Properties and the Influence of Rock Fabric
DOI: https://doi.org/10.1007/s00603-021-02474-3
Persistent URL: http://resolver.sub.uni-goettingen.de/purl?gldocs-11858/11151
Persistent URL: http://resolver.sub.uni-goettingen.de/purl?gldocs-11858/11151
Schuster, Valerian; Rybacki, Erik; Bonnelye, Audrey; Herrmann, Johannes; Schleicher, Anja M.; Dresen, Georg, 2021: Experimental Deformation of Opalinus Clay at Elevated Temperature and Pressure Conditions: Mechanical Properties and the Influence of Rock Fabric. In: Rock Mechanics and Rock Engineering, Band 54, 8: 4009 - 4039, DOI: 10.1007/s00603-021-02474-3.
|
Dokument öffnen: |
The mechanical behavior of the sandy facies of Opalinus Clay (OPA) was investigated in 42 triaxial tests performed on dry samples at unconsolidated, undrained conditions at confining pressures (pc) of 50–100 MPa, temperatures (T) between 25 and 200 °C and strain rates (ε˙) of 1 × 10–3–5 × 10–6 s−1. Using a Paterson-type deformation apparatus, samples oriented at 0°, 45° and 90° to bedding were deformed up to about 15% axial strain. Additionally, the influence of water content, drainage condition and pre-consolidation was investigated at fixed pc–T conditions, using dry and re-saturated samples. Deformed samples display brittle to semi-brittle deformation behavior, characterized by cataclastic flow in quartz-rich sandy layers and granular flow in phyllosilicate-rich layers. Samples loaded parallel to bedding are less compliant compared to the other loading directions. With the exception of samples deformed 45° and 90° to bedding at pc = 100 MPa, strain is localized in discrete shear zones. Compressive strength (σmax) increases with increasing pc, resulting in an internal friction coefficient of ≈ 0.31 for samples deformed at 45° and 90° to bedding, and ≈ 0.44 for samples deformed parallel to bedding. In contrast, pre-consolidation, drainage condition, T and ε˙ do not significantly affect deformation behavior of dried samples. However, σmax and Young’s modulus (E) decrease substantially with increasing water saturation. Compared to the clay-rich shaly facies of OPA, sandy facies specimens display higher strength σmax and Young’s modulus E at similar deformation conditions. Strength and Young’s modulus of samples deformed 90° and 45° to bedding are close to the iso-stress Reuss bound, suggesting a strong influence of weak clay-rich layers on the deformation behavior.
Statistik:
ZugriffsstatistikSammlung:
- Geologie [933]